This product is designed for solar
off-grid system (independent system), solar power plants and other systems. The
new generation of MPPT controller selection 16-bit digital signal processing
chip. It adopts advanced all-digital intelligent tracking algorithm to obtain
the maximum power point of solar modules, and real-time output current, voltage
detection, to ensure the normal battery charging and improve the utilization of
components. At the same time the system has short-circuit, overload, and a
unique battery automatic shutdown, recovery and other full-featured protection
measures.
● All-digital intelligent tracking
algorithm, the fastest access to solar modules maximum power point, the
conversion efficiency up to 95%, high utilization of PV modules.
● Increase the charging strategy
(first constant current, then constant pressure, the last float), protect the
battery and extend its service life.
● All-digital intelligent control,
with remote control.
● Standard MODBUS communication
protocol to facilitate background detection.
● With overcharge, overload, short
circuit and other sound protection, so that the machine is running more
reliable.
● Wide input voltage range, to solve
the problem of components should not be matched, selection more convenient.
● With lightning protection, solar
anti-reverse charge, battery reverse, open circuit protection.
● Small size, light weight, rack
design.
● Small power and DC power
distribution cabinet group screen, high power can be more than a parallel group
counters, easy maintenance.
● Single maximum 100A, can be
expanded according to demand.
● Touch screen display, beautiful
atmosphere.
Type |
BSD216-50A |
BSD216-100A |
BSD384-50A |
BSD384-100A |
|
Controller of electrical parameters |
Rated voltage(V) |
216 |
384 |
||
Rated charging current(A) |
50 |
100 |
50 |
100 |
|
Max battery terminal allows input voltage(V) |
265 |
475 |
|||
Max PV input voltage(V) |
550 |
750 |
|||
Max PV input power(W) |
10800 |
21600 |
7680 |
38400 |
|
PV array input control approach |
1 |
||||
Charging method |
MPPT |
||||
Battery float voltage(Vdc) |
247.5 |
440 |
|||
Battery average voltage(Vdc) |
260 |
460 |
|||
Self consumption(mA) |
<300 |
||||
Communication |
RS485 |
||||
Rated efficiency |
≥95% |
||||
Protect degree |
IP20 |
||||
Word condition |
Working temperature |
-20℃~+50℃ |
|||
Relative humidity |
<90% No condensation |
||||
Altitude |
2000m |
||||
Insulation strength(input and output) |
1500VAC,1min |
||||
Noise(1meter) |
≤50dB |
||||
Size(W*D*H) |
482*420*222(5U) |
||||
Protect function |
Protection for input connecting contrary, input lack of voltage, output overload, output short circuit, over load |
||||
Protect switch |
Solar input plus switch control, battery plus switch control |